Fixture Rendering

In order to properly manage planograms system needs Fixture Rendering and Fixture icon. Fixture Rendering is line drawing of fixture properly scaled. Fixture Icon is birds eye view of fixture that is positioned on the floor-plan.

Sample Icon:

Sample Rendering:

In order for system to display POP, device or accessory planogram accurately it is recommended to upload fixture rendering (line drawing representing fixture) that is proportional to actual fixture. Fixture must be rendered using DPI calculation. Each inch must be multiplied by pixel count. You can use following pixel multipliers: 2,4,6,8,10,12,16,24,32. According to this formula 24" x 48" fixture can be drawn as either

Width (inches)	Height (inches)	DPI	Width (Pixels)	Height (Pixels)
24	48	2	48	96
24	48	4	72	144
24	48	6	144	288
24	48	8	192	384
24	48	10	240	480
24	48	12	288	576
24	48	16	384	768
24	48	24	576	1152
24	48	32	768	1536

Generally fixtures are rendered to fit screen without scrolling (800x660) if possible. Depending on the fixture design fixture might need to be rendered to have few different views (Front, Side, Pop...). If you have fixture rendered to show multiple sides you can convert this fixture to 3D view simply by defining view areas for each side.

---

Add 3D view to fixture

• Click on Fixture in Library
• Click on Views Tab
• Click on - 3D button in Rendering Section
• You will be taken to 3D builder page
• Select side you want to define (Front, Right, Back, Left, Top, BottoM)
• Box to define selected area will show on top left of the fixture
• Drag and expand box over defined side area
• Repeat process for all areas you need to define.
• Click Save

---